For screen reader problems with this website, please call(217) 351-09092 1 7 3 5 1 0 9 0 9Standard carrier rates apply to texts.

We Are Now A Certified Klipsch Heritage Dealer! - CLICK HERE to Shop Klipsch

SnapAV Episode® Black 2 Channel 70V IP-Enabled Amplifier-ESA-70V2CH-150W

Model #: ESA-70V2CH-150W
563747
Snap One
At a Glance

These 70-volt, 2-channel digital amplifiers are OvrC enabled for easy remote management, while popular control drivers, IR, IP, and RS-232 allow you to customize audio in commercial environments. It fits perfectly in restaurants, bars, or small conference rooms, and can maximize the sound of an outdoor speaker system.

Call for Best Price
$99,999.00Save

Get to know this product.

These 70-volt, 2-channel digital amplifiers are OvrC enabled for easy remote management, while popular control drivers, IR, IP, and RS-232 allow you to customize audio in commercial environments. It fits perfectly in restaurants, bars, or small conference rooms, and can maximize the sound of an outdoor speaker system. With four inputs and a loop out, it provides all the flexibility needed for a professional installation.

Simplified Control System Integration

Along with control drivers, this Episode® 70V Digital Amplifier can also be controlled via IR, IP, and RS-232. With the control protocol we’ve provided under the Support tab, it functions easily with any IR or serial control system and provides access to volume control, source selection and summing.

Balanced & Unbalanced

Most amps from the other guys force you to cut up an RCA cord to connect a standard source. Retract the razor knife and use Episode instead. This amp offers standard RCA connections for unbalanced inputs, as well as screw terminals for balanced/unbalanced inputs. Plus, an intuitive UI allows you to route inputs and outputs. So no matter what type of connection you need, you’re covered. Note: Inputs are independent by channel. If using a stereo source, you will need a Y-adapter to sum left and right RCAs into a single amp input.

Loop Outputs

When using a stack of amplifiers, the loop outputs are a convenient way to daisy-chain the signal to downstream components – perfect for a high power outdoor zone, for example. This eliminates the need for RCA splitters and gives a much cleaner (and faster) install.

Gain & Volume Control

Thanks to convenient gain controls on the UI, you can easily match input levels and prevent clipping. Plus, output level knobs allow you to adjust the volume per channel right from the UI or the amplifier itself. These controls can even be changed or disabled on the UI to avoid any customer miscues.

Audio Sensing

Three convenient turn-on modes make it easy to integrate with simple volume controls or sophisticated control systems right from the UI. Audio-sense is perfect for connecting to an audio source or mixer – when the source turns off, the amplifier will gracefully go into a power-saving standby mode. The 12V trigger inputs allows you to use a mixer or control system to turn the amp on or off, or have it "wake up" another device when the amp is activated.

Part of the OvrC Ecosystem

Adjust audio routing, input gain and output levels, and a wide variety of amplifier network settings remotely, with the help of OvrC, our signature cloud control platform. OvrC provides remote access to the local UI, where you can update firmware, modulate the amplifier gain, select inputs, set clipping levels, power-cycle the unit, or check the status and temperature of your device.

Remote Power Cycling & Firmware Updates

Need to reset an installed device, or upgrade to the latest firmware? Now you can do both of these things remotely in order to save valuable install time, and ensure your customer gets an efficient, fast solution for any network issues.

Installation Flexibility

A slim 1U (150 & 300) or 2U (500) chassis takes up less space when stacked on a shelf or installed in a rack. Included rack ears and amplifier feet give you the flexibility to install it where you need.

ESD & Surge Protection

We engineered this amp with high surge level protection components. During development, every connection was tested with both an ESD and lightning simulator – all speaker outputs, audio inputs, even the power input were ESD tested with up to 15,000V and surge tested at 2,400V.

2-Year Limited Warranty

This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).

Specifications

Misc. Specs

Depth (in.)14
Height (in.)1.73
Impedance10K Ohms Unbalance; 20K Ohms Balanced
Channels2
Frequency Response50Hz-20kHz
Width (in.)17
Manufacturer Warranty2 Year
Watts per Channel (Watts)150
Headset JackNo
Color Finish NameBlack
Smart CompatibleYes
Wifi CapableNo
Bluetooth CapableNo
Product Weight11.9
CollectionEpisode®
ColorBlack
WarningProposition 65 Warning for California Residents